Thermal imaging camera - FLiR Lepton Dev Kit V2 - SparkFun KIT-15948
- Артикул:
- 54170634
Характеристики
- Напряжение до
- 3.0 V
- Напряжение от
- 5.5 V
Камера
- Тип камеры
- module
Общие характеристики
- Датчик - Температура до
- 50 °C
- Датчик - Температура от
- 0 °C - 70 °C
Прочие свойства
- Бренд
- SparkFun
Описание
A kit containing the Flir Lepton V2 thermal imaging camera, and a board to facilitate its connection. The Lepton LWIR radiometric module has a resolution of 80 x 60 px and registers infrared radiation of wavelength range from 8 μm to 14 μm. An SPI interface is required to read the image. The I2C bus is used to configure the camera, although it is not absolutely required. The device is powered from 3 V to 5.5 V.
Lepton Dev Kit V2 is compatible with Arduino and Raspberry Pi microcomputers.FLiR Lepton Dev Kit camera presentation.
Dimensions of the FLiR Lepton V2 thermal imaging camera module.
- Wavelength range: 8 μm to 14 μm
- Measurement angle:
- For diagonal mode: 60°
- For HFOV mode: 50°
- Thermal sensitivity: up to 50 mK
- Resolution: 80 px (h) x 60 px (v)
- Single pixel size: 17 μm
- Frame rate: 9 Hz
- Frame rate: 9 Hz Image timeout: less than 1.2 seconds
- Average power consumption: approximately 150 mW
- Available interfaces:
- SPI
- I2C
- Supply voltage: from 3.0 V to 5.5 V
Warning!
The module is sensitive to electrostatic discharge. Ensure proper grounding before installation.
The FLiR Lepton Dev Kit V2 thermal imaging camera, has 20 pins to connect the wires. Their diagram and description is illustrated by the following graphics.
Schematic and pinout of the module.
Comparison of the FLiR Lepton and FliR Lepton V2 Models Comparative specification Model: EFLiR Lepton Dev Kit EFLiR Lepton Dev Kit V2 Resolution: 80 x 60 px 80 x 60 px Wavelength range:8 μm to 14 μm
8 μm to 14 μm
Measuring angle for HFOV mode: 51°C 50°C Thermal sensitivity up to 50 mK up to 50 mK Frame rate less than 9 Hz less than 9 Hz Control interface: I2C I2C Video interface: SPISPI
Image waiting time:less than 0.5 s
less than 1.2 s
Integrated shutter: no yes Metering angle for HFOV mode: 51°C 50°C Average power consumption approx. 150 mW approx. 150 mW Supply voltage: 3.0 V to 5.0 V 3.0 V to 5.5 V Contents of the kit- FLiR Lepton V2 camera module
- Printed circuit board with leads
- Manufacturer's website: SparkFun KIT-15948
- Product page
- Quick user guide
- Product catalog note
- Libraries on GitHub: LeptonModule
- Libraries on GitHub: PyLepton
- Libraries on GitHub: GetThermal
Доставка
Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода . Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 12 июня - 2 июля.
На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электроники SparkFun в различные города России, такие как Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.
Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.