Характеристики
- Напряжение до
- 4.5 V
- Напряжение от
- 13.5 V
Прочие свойства
- Бренд
- Pololu
Свойства
- Каналы
- 2
Энергопитание
- Сила тока
- 1 A
Описание
The H-bridge TB6612FNG is an efficient motor driver in a small and SSOP24 housing. Pololu company has met the expectations of users and created a module containing TB6612FNG chip and passive components needed for its proper operation. Signals are provided on traditional pins (2.54 mm pitch). The module can be plugged into contact board or connected with wires.
All logic signals are internally pulled to ground. The maximum PWM frequency is 100 kHz.
TB6612 controller truth tableAIN1BIN1
AIN2BIN2
PWMAPWMB Outputsmotorsstatehigh
statelow% fill
(different from zero)
The motor turns clockwise at the maximum speed set by pwm (different from 0). statelow statehigh% fill
(different from zero)
The motor turns at the maximum speed set via pwm (different from 0) counterclockwise. statelow statelow nomeaningfree braking
(soft stop)
statehigh statehighmeaningless
soft stop
(soft stop)
nomeaning nomeaninglow state
0% filling
(hard-stop).
Video describing operation of H-bridge - DC motor driver.
The TB6612 chip can be used as a controller for Pololu micromotors. If the motors will be exposed to stalling, it is recommended to merge the channels to achieve higher current capacity. To do this, connect the following leads together:
- AO1 with BO1
- A02 with BO2
- PWMA with PWMB
- AIN1 with BIN1
- AIN2 with BIN2
Schematics
The module contains a soldered bridge with goldpin leads, with standard 2.54mm spacing. There are also filtering capacitors on the board, which makes the proper connection with the microcontroller sufficient for proper operation. The schematic is available at this address.
We also offer other motor controllers including separate TB6612 chip.
- Power supply for motors (VMOT): from 4.5 V to 13.5 V
- Logic power supply (VCC): from 2.7 V to 5.5 V
- Maximum output current: 3 A per channel
- Continuous output current: 1 A per channel
- When both channels are connected: 2 A
- Maximum PWM frequency: 100 kHz
- Built-in thermal cut-off circuit
- Filter capacitors on both supply lines
- Protection against reverse current from motors
- Manufacturer's website - Pololu #713
- Documentation
- Schematics of the module
- Connection to Arduino
- Library for Arduino
- Simple Eagle library
Доставка
Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода и начинается от 680 руб. Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 7 июня - 27 июня.
На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электрики Pololu в различные города России, такие как Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.
Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.
Мы сотрудничаем с поставщиками электрики Pololu и предлагаем вам самые выгодные предложения на брендовые товары из Америки. Опираясь на свой многолетний опыт, выбираем только лучшие позиции из аутлетов и дискаунтеров, чтобы предоставить вам оптимальные цены, в которые не включены дополнительные расходы на аренду торговых помещений.
Доставка товаров осуществляется прямо с нашего склада до указанного вами адреса. Вы получаете оригинальный товар по цене, которая недоступна для местных магазинов. В нашем интернет-магазине вы всегда найдете широкий ассортимент брендовых товаров с выгодными скидками.
Мы следим за каждым этапом вашей покупки и предоставляем отслеживание заказа на всех этапах, начиная с момента оплаты.