Step-Up Voltage Regulator U1V11F5 - 5V 1,2A - Pololu 2562

Бестселлер
47399430
1 262 ₽

Мы сотрудничаем с поставщиками электрики Pololu и предлагаем вам самые выгодные предложения на брендовые товары из Америки. Опираясь на свой многолетний опыт, выбираем только лучшие позиции из аутлетов и дискаунтеров, чтобы предоставить вам оптимальные цены, в которые не включены дополнительные расходы на аренду торговых помещений.

Доставка товаров осуществляется прямо с нашего склада до указанного вами адреса. Вы получаете оригинальный товар по цене, которая недоступна для местных магазинов. В нашем интернет-магазине вы всегда найдете широкий ассортимент брендовых товаров с выгодными скидками.

Мы следим за каждым этапом вашей покупки и предоставляем отслеживание заказа на всех этапах, начиная с момента оплаты.

  • Бренд Pololu
  • Доставка из Польши
  • Пункт выдачи СДЭК 14 июля
  • Стоимость доставки заказа в Россию от 695 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение от
5.5 V
Выходное напряжение от
5.0 V
Выходное напряжение до
5.0 V

Вес и размеры

Длина
15 mm
Высота
3 mm
Ширина
12 mm

Общие характеристики

Напряжение до
0.5 V
Стабилизатор - Тип
step-up
Стабилизатор - Тип 2
switching

Прочие свойства

Бренд
Pololu
Номинальное выходное напряжение
5.0 V

Энергопитание

Сила тока
1.2 A

Описание

Product description: U1V11F5 - 5V 1,2A step-up converter - Polol 2562.

A controller that increases the voltage from 0.5 to 5.5 V to a fixed 5 V value. When 5 V is exceeded at the input, the system automatically switches to rope mode of the voltage reducing regulator. The efficiency of the inverter is 70 - 90 % depending on the specified input voltage. The system has a standby mode, which is switched on by giving a low state to the SHDN output. We also offer a versionwith an output voltage of 3.3 V.

Outputs

The module has three outputs:

  • VIN- input voltage from 0.5 V to 5.5 V, please pay attention toshort voltage pulses that can damage the system
  • GND- mass potential
  • VOUT -output voltage
  • SHDN -system shutdown - low state, which makes the system go into low power consumption state. The output is pulled to the VIN via a 100 kΩ resistor, which makes the system switched on by default. If the pin is not used, it can be left unconnected or connected to an adjacent VIN. Otherwise, follow the instructions below:
    • For VIN < 0.8 V, the voltage value at SHDN must be below 0.1 * VIN to lock the controller and above 0.9 * VIN to unlock it.
    • For 0.8 V ≤ VIN ≤ 1.5 V, the voltage value at SHDN must be below 0.2 * VIN to lock the controller and above 0.8 * VIN to unlock it.
    • For VIN >11.5 V , the voltage value at SHDN must be below 0.4 V to lock the controller and above 1.2 V to unlock it.

The connectors are properly signed on the board. Output Raster 2.54 mm - popular connectorsgoldpin, allow the module to be mounted incontact plateorconnectionby means of cables.

System efficiency

Efficiency is defined as the ratio of output power to input power (Power out)/(Power in). This is a very important parameter when working with portable energysources(batteries and accumulators), where the time of operation on one charging cycle counts. The efficiency of this pulse system is about 70 % - 90 %. The output current depends on the input voltage, details on the diagram:

Efficiency and output current of the system at 5 V output voltage.

Dangerous voltage pulses

When connecting the power supply to the module, dangerous, short, high amplitude eclectic impulses (so-called pins) may appear, which may permanently damage the system. According to Polol's tests, for input voltages above 4.5 V, the pins may have an amplitude high enough to damage the module. In order to protect against this unwanted phenomenon it is recommended to solder a capacitor of at least 33 uF as close as possible to the pins powering the converter.

U1V11F5 inverter specification
  • Input voltage: 0.5 V to 5.5 V
  • Output voltage: 5 V
  • Maximuminputcurrent: 1,2 A
  • Output current: dependent on input voltage -see graph
  • Accuracy of output voltage: 4 %
  • System efficiency: 70 - 90 %
  • Standby state - SHDN output
  • Integrated shutdown system for inverters at too high an operating temperature
  • Dimensions: 15.3 x 11.5 x 3 mm
  • Weight (without connectors): 0.7 g
Useful links
  • Manufacturer's website - Polol #2562

Доставка

Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода и начинается от 695 руб. Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 3 июля - 23 июля.

На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электрики Pololu в различные города России, такие как  Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.

Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.