Характеристики
- UC - I2C
- yes
- UC - USB
- microUSB
- UC - WiFi
- yes
- UC - UART
- yes
- Интерфейс UC - SPI
- yes
Общие характеристики
- UC - A/C
- 12-bit
- UC - PWM
- 16
- UC - ядро
- ARM Cortex-M0+, 2. Dual Core
- UC - Разъем
- 5V microUSB
- UC - Вспышка
- 2048 kB
- UC - аналог в
- 3
- UC - Микроконтроллер
- RP2040
- UC - Цифровые контакты
- 26
Прочие свойства
- Бренд
- Raspberry Pi
Энергопитание
- Номинальное напряжение
- 5 V
Описание
A small Raspberry Pi Pico module equipped with the proprietary Raspberry RP2040 microcontroller with the CYW43439 wireless communication system. RP2040 is a dual-core ARM Cortex M0 + chip clocked at 133 MHz, with 264 KB of SRAM and 2 MB of Flash memory. Thanks to the CYW43439, WiFi IEEE 802.11 b / g / n wireless communication is possible. The system has 26 GPIO pins that work with a voltage of 3.3 V, and a built-in temperature sensor. The Raspberry Pi Pico is programmed in C / C ++ and MicroPython via the microUSB connector.
The Raspberry Pi Pico W is equipped with 26 GPIO pins. Among them you can find interfaces such as: 2x SPI, 2x I2C, 2x UART, 3x ADC 12-bit, 16x PWM. The module is additionally equipped with 8 programmable IO pins (PIO), which are designed to support non-standard peripheral devices.
Raspberry Pi Pico W power supplyThe board has a built-in microUSB port, which is used both for power supply and communication of the Raspberry Pi Pico W board with a computer. For proper operation, the module requires a 5V power supply. The board can also be powered from the VSYS pin with voltage from 1.8 V to 5.5 V , using, for example, a 3.7 V Li-Pol battery or a 3x AA battery.
The logical part of the Raspberry Pi Pico works with a voltage of 3.3 V.
The pinout of the Raspberry Pi Pico W.
The Raspberry Pi Pico W is programmed in C / C ++ or MicroPython . In order to upload the program to the board, press and hold the BOOTSEL button and connect the Raspberry Pi Pico to the computer with a microUSB cable. The computer will detect the module as a USB mass storage device called RPI-RP2, the program file should be dragged and dropped into the newly found volume. The manufacturer provides an SDK repository for the C / C ++ and MicroPython programming languages, which can be found in the useful links below.
The Raspberry Pi Pico W is programmed by connecting to a computer with a USB cable by dragging and dropping the program code file to the newly created volume. There is also a sample UF2 file for download to help you get started with MicroPython.
- Download the MicroPython UF2.
- Press and hold the BOOTSEL button and plug the board into the USB port of your Raspberry Pi or computer.
- Release BOOTSEL when Pico is connected to your computer.
- The Raspberry Pi Pico will be detected as a mass storage device with volume RPI-RP2.
- Drag and drop the MicroPython UF2 file to the RPI-RP2 volume.
- Pico will restart, MicroPython will now be used.
- You can access REPL and MicroPython via the serial USB port.
Download the UF2 .
The first program any programmer will write is "Hello World", in this case the Raspberry Pi Pico W will be programmed via the Raspberry Pi 4B 's USB serial port.
- Download the UF2 file "Hello World".
- Press and hold the BOOTSEL button and connect the Raspberry Pi Pico to the Raspberry Pi's USB port.
- The board is detected as a mass storage device with volume RPI-RP2.
- Drag and drop the UF2 file to the RPI-RP2 volume.
- Pico will restart.
- Open a terminal on the Raspberry Pi 4B and run the commands: sudo apt install minicom minicom -b 115200 -o -D / dev / ttyACM0
- You should see "Hello World" listed in the terminal window.
Download the UF2 .
Check the code .
Check out the additional accessories we have prepared for the Raspberry Pi Pico W module. Accessories can be found in the See matching accessories section, under the photo gallery. By choosing these accessories, you can follow the manufacturer's examples from the SDK documentation for C and Python.
- Manufacturer's website
- Documentation RP2040
- Raspberry Pi Pico W documentation
- The fritzing facility
- Internet connection guide
- Design files RP2040
- Pico C SDK
- Pico Python SDK
- User Guide
- GitHub repository - Pico SDK
- GitHub repository - sample codes
- MicroPython - Thonny development environment
Доставка
Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода и начинается от 934 руб. Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 26 июня - 16 июля.
На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электроники Raspberry Pi в различные города России, такие как Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.
Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.
Мы сотрудничаем с поставщиками электроники Raspberry Pi и предлагаем вам самые выгодные предложения на брендовые товары из Америки. Опираясь на свой многолетний опыт, выбираем только лучшие позиции из аутлетов и дискаунтеров, чтобы предоставить вам оптимальные цены, в которые не включены дополнительные расходы на аренду торговых помещений.
Доставка товаров осуществляется прямо с нашего склада до указанного вами адреса. Вы получаете оригинальный товар по цене, которая недоступна для местных магазинов. В нашем интернет-магазине вы всегда найдете широкий ассортимент брендовых товаров с выгодными скидками.
Мы следим за каждым этапом вашей покупки и предоставляем отслеживание заказа на всех этапах, начиная с момента оплаты.