EFFETTO MARIPOSA Caffelatex Tubeless Plus 40-45 mm Strip 2 Units With Valve

Caffélatex Tubeless Strip Is A Very Light, Puncture-Proof And Transparent Tubeless Rim Strip That Makes Tubeless Conversions Quick And Easy. Strip Allows Tubeless Conversion Of Most Standard Bicycle Wheels, Using Tubeless Or Tubeless-Ready Tyres And Caffélatex Or Végétalex Sealant. ´´Single´´ Means You Get Just One Strip, No Tubeless Valve Included. Features: - The Easiest Way To Perform A Tubeless Conversion - Very Light Tubeless Rim Strip - Damage-Resistant - Long Lasting, It Can Be Moved From One Wheel To Another - Extended Range Of Widths - ´´Single´´ Means You Get Just One Strip, No Tubeless Valve Included Tubeless Conversion, Made Easy: - Caffélatex Strip Is The Ultimate Tubeless Solution For Very Difficult Rims (For Example, Aluminum Rims With Mat Surface Finishing, Rims With Very Deep Channel, Pin-Joined Rims Where The Junction Is Not Welded Etc.). This Because Strip Isn’T Adhesive: It’S Made In One Piece And Relies On Its Elasticity To Sit Tight On The Rim. To Convert A Rim To Tubeless, Simply Remove The Existing Rim-Strip, Choose The Appropriate Strip Size And Follow The Following Easy Steps: - (Optional Step) Use A Roll Of Electrician Tape And Seal The Spoke Holes Of The Rim. This Just In Order To Create An Additional Protection To Prevent Sealant From Getting Inside The Rim Inner Chamber, In The Unlikely Case The Strip Moves And Let Some Liquid Go Through. - Insert A Tubeless Valve In The Hole Of Strip, So That The Rubber Base Is In Contact With Strip. - Secure Strip To The Rim, Tightening The Nut On The Valve Stem. It’S Important To Push The Valve Base Against The Rim While Doing So, To Achieve A Proper Air-Tightness. - Keeping The Wheel With The Valve At 12 O’ Clock, Finish Mounting Strip Onto The Rim. - With A Screwdriver Or A Similar Tool, Center Strip Inside The Rim Channel. - Add Tubeless Tyre, Caffélatexor Végétalexsealant, Inflate, Ride. Lightweight: Being Thin (0,8 Mm) And Strong, Strip Only Weighs 30 G (For S 26″/27,5″), Making It Weight-Wise Competitive With Adhesive Tubeless Tapes (Ranging Between 9 And 20 G Per Wheel) And Simply Superior To Old Butyl Tubeless Rim Strips (With Limited Strength And Adding Over 65 G Per Wheel). Weights(*) For A Single Strip Are: - Strip L 29″: 53 g Highly Resistant To Damage And Puncture: - The Special Polymer Employed In Its Construction Makes Strip Highly Resistant To Damage And Puncture. It’S Also Very Stable From A Chemical Standpoint And Cannot Be Damaged By Caffélatex Or Other Non-Chemically-Aggressive Tyre Sealants.
 Long Lasting: - Something You Can Do With Strip That You Simply Can’T With Adhesive Tubeless Tapes: Moving Strip From One Rim To Another. 
As The Strip Material Is Very Durable, Its Lifespan Can Exceed The One Of The Rim It’S Mounted On, And Can It Be Removed And Mounted On Another Rim. Strip Can Also Be Removed And Mounted On The Same Rim If A Spoke Needs To Be Replaced.