Converter DC/AC step-up 12VDC / 230VAC 700/1000W - sinus - Volt IPS-1000

The inverter is a step-up voltage, the input voltage is 12 VDCand the output voltage is 230 V AC. Continuous power is 700 W, maximum instantaneous power is 1000 W. The controller is suitable for supplying 230 V AC devices in case of lack of direct access to the mains.

DC/AC step-up converter Volt IPS-1000.

The Volt IPS-1000 voltage regulatorproducesamodifiedsinusoidal output, i.e.rectangular alternating voltage.The rms value of this waveform is identical to the rms value of the sinusoidal waveform occurring in the power network. The inverter is equipped with a number ofprotections, suchas: short-circuit, thermal, under-voltage, over-voltage, overload. The inverter has an efficiency equal to 92%.

• Battery voltage: 12 V
• Input voltage: 10.5 V to 15.5 V DC
• Output voltage: 225 V to 235 V AC
• Overload power (momentary): 1000 W
• Rated power (continuous): 700 W
• Output voltage frequency: 50 Hz (+/- 2 Hz)
• Efficiency at full load: 92%
• Under-voltage protection tripping threshold: 24,4 (+/- 0,6 V)
• Operating temperature: -10°C to 40°C
• USB socket: yes - 5 V
• Security:
  • Short circuit protection
  • thermal - switches off the device after exceeding approx. 60°C - 70°C
  • Under-voltage: switches off the device when the input voltage is too low
  • over-voltage - switches off the device when the input voltage is too high
  • overload protection - switches off the device if it has been overloaded for more than a dozen seconds

• Volt IPS-1000
• Clamps

Cables included.

The voltage converter is supplied with 12 V DC. The inverter output is supplied with an alternating voltage with a time profile and parameters similar to those of the 230 V nN network. The inverter supplies 700 W continuous power and 1000 W peak power. The VOLT IPS-1000 VOLT converters are equipped with two 230 VAC sockets and a 5 VDC USB socket. The efficiency of the inverter is 92% at full load. The VOLT IPS-1000 is an excellent device, which is particularly useful in places where there is no access to mains power. Built-in protection prevents damage to the inverter and the connected consumers.

Most chargers for mobile devices and power supplies for domestic electrical appliances convert the AC voltage from a 230V socket to a suitably reduced DC voltage (e.g. 5V, 12V, 24V). Exactly on the opposite principle works the DC/AC step-up voltage converter, which, using transistor keys controlled by the PWM signal, converts the DC voltage from the battery to 230V AC with a shape similar to the sinusoidal voltage. This inverter is an excellent alternative to noisy gasoline generators. Quiet operation and excellent stability of the output voltage allows easy access to power supply for laptops, kettles and other devices, e.g. on a camping site or in other places with limited access to mains electricity.

• Manual