Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - Pololu 5034

Бестселлер
54829188
7 557 ₽

Мы сотрудничаем с поставщиками электроники Pololu и предлагаем вам самые выгодные предложения на брендовые товары из Америки. Опираясь на свой многолетний опыт, выбираем только лучшие позиции из аутлетов и дискаунтеров, чтобы предоставить вам оптимальные цены, в которые не включены дополнительные расходы на аренду торговых помещений.

Доставка товаров осуществляется прямо с нашего склада до указанного вами адреса. Вы получаете оригинальный товар по цене, которая недоступна для местных магазинов. В нашем интернет-магазине вы всегда найдете широкий ассортимент брендовых товаров с выгодными скидками.

Мы следим за каждым этапом вашей покупки и предоставляем отслеживание заказа на всех этапах, начиная с момента оплаты.

  • Бренд Pololu
  • Доставка из Польши
  • Пункт выдачи СДЭК 25 июня
  • Стоимость доставки заказа в Россию от 893 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение до
4.5 V
Напряжение от
48.0 V

Общие характеристики

Promotion
BF20

Прочие свойства

Бренд
Pololu

Свойства

Каналы
3

Энергопитание

Сила тока
2 A

Описание

Product description: Motoron M3H256 three-channel driver for motors - 48 V / 2 A - shield for Raspberry Pi - Pololu 5034

The Motoron M3H256 is a three-channel DC motor controller manufactured by the Pololu company. The supply voltage of DC motors ranges from 4.5 V to 48 V , continuous current consumption can be up to 2 A , and temporary (for 1 second) up to 6.4 A. Motoron M3H256 is a module in the form of an overlay for Raspberry Pi minicomputers, version B + and newer. The subject of the sale is a cap with connectors for self-assembly.

The product is compatible with the Raspberry Pi!

Before starting work, also check the user's guide prepared by the manufacturer.

Motoron M3H256 three-channel motor driver - 48 V / 2 A - overlay for Raspberry Pi - Pololu 5034.

How to connect the controller with the engine? - Motoron M3H256 driver connection diagram.

Special features of the Motoron M3H256 controller
  • Based on the Motoron M3S256 system, which allows you to control up to three DC motors at once
  • It is protected against reverse polarity of the motors' power supply
  • Performs optional cyclic redundancy checking (CRC)
  • It has a command timeout feature that stops the motors from running if your Raspberry Pi stops working
  • It has a built-in thermal cut-off circuit
  • Includes filter capacitors located on both power lines
  • Provides protection against motor reverse current

The subject of the sale is the driver for Motoron M3H256 motors for self-assembly. Our offer also includes a factory-assembled version and a version without connectors .

Motoron M3H256 driver specification
  • Number of channels: 3
  • Input voltage: 4.5 V to 48 V
  • Logic supply voltage: 2.8 V to 5.5 V
  • Continuous output current: 2 A per channel
  • Maximum instantaneous current per channel: 6.4 A peak for 1 second
  • Communication interface: I2C
  • Maximum I2C frequency: up to 400 kHz
  • Configurable traffic parameters:
    • Maximum acceleration / deceleration forward / reverse
    • Initial speed forward / reverse
    • Forward / Reverse direction change delay
  • Maximum PWM frequency: configurable - eight options available from 1kHz to 80kHz
  • Configurable automatic error response
  • Measurement of engine supply voltage (VIN)
  • Two LEDs indicating the operating status of the controller
Kit contents
  • Motoron M3H256 three-channel motor driver - 48 V / 2 A - overlay for Raspberry Pi - Pololu 5034
  • 2x female connectors 1x 10-pin
  • 4x 2-pin screw connectors, 3.5 mm pitch
  • 4x 2-pin screw connectors, 5 mm pitch
  • 1x male connector 1x 25-pin
  • Set of M2.5 x 11 mm spacers, bolts and nuts.

The arrangement of the pins of the Motoron M3H256 driver.

Useful links
  • Manufacturer's website: Pololu 5034
  • User Guide
  • Dimensional diagram of the board
  • Motoron M3S256 driver 3D model
  • Motoron Python Library

Доставка

Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода и начинается от 893 руб. Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 14 июня - 4 июля.

На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электроники Pololu в различные города России, такие как  Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.

Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.