MILKIT Tubeless Booster Tire 0.75L CO2 cartridge

Are you looking for the easiest and quickest way to set your tubeless tires on your tubeless rim? MilKit’s TL Booster is the award-winning solution. The MilKit tubeless specialists take the installation of tubeless tires to the next level with the milKit tubeless booster. You don´t need to invest in a compressor nor do you have to buy a tubeless floor pump. The milKit Booster is exactly what you need to mount tubeless tires quickly and easily. The booster is also a faithful companion on rides and can be used as a drinking bottle. The Eurobike Award winning milKit Booster is convincing for the following reasons: - A very low weight (only 140 gr/5 oz) - A high efficiency (full air pressure right by the valve) - Ease of use (just press on the valve, done) - Its portability (can be used as drinking bottle in your bottle cage) - Great value - It is environmentally friendly as it replaces CO2 cartridges - Compatible with all Presta tubeless valves, use milKit valves for the best results - Space-saving: replaces large air compressors - Eco-friendly: replaces single use CO2 cartridges - Economical: no more CO2 cartridges or investing in a costly compressor - Efficient: no additional hoses means the full air pressure goes straight to your valve - Lightweight Booster head (21gr/0.74 oz) with a drawstring bag to take it on rides - Drinking bottle cap included Using the MilKit tubeless booster simplifies tubeless installation, especially in combination with the MilKit valves: - Install MilKit valves into your rim - Inflate the MilKit booster with your bike pump - Remove valve core for good air flow and press the booster on valve - The milKit valves keep the air in the tire without the valve core installed. The sealant can be added after inflating the tire with the MilKit syringe; it is absolutely mess free! - Insert valve core and inflate the tire to full pressure MilKit Booster large includes the following: 1 x 0.75 L/25 oz aluminium bottle 1 x Booster head 1 x water bottle cap 1 x drawstring bag for Booster head How to use the milKit Booster: - The milKit Booster is a revolutionary tool that enables bikers to inflate tubeless tires without a large & costly air compressor. It makes mounting tubeless at home or trailside easy! - The milKit Booster provides a lightweight, and easy to use answer for those looking at how to inflate a tubeless tire. With up to 11 bar / 160psi pressure available, your tire will immediately seat safely on the rim and seal evenly. - An aluminum bottle is the base of the Booster system, which works in a few simple steps: - Inflate the Booster with your bike pump - Remove the valve core from your tubeless valves for more efficient air flow - Push the Booster onto the valve stem to inflate. With milKit valves, air stays in the tire even without the valve core installed thanks to their additional smart rubber flaps. - Add sealant to the tire with the mess free milKit syringe system - Screw valve core back and inflate tire to full pressure until the tire fully jumps onto the rim Instructions are even printed on the bottle, so it couldn’t be any easier: - Inflating tubeless tires with the milKit Booster is more efficient than any other existing solution as there are no additional hoses or valves. This means the full air pressure goes straight to your valve. - The milKit Booster is small and very lightweight, only 150 grams, and therefore can be brought along in the back of the car or on any ride. The option to use the Booster as a water bottle makes it the perfect, 2-in-1 product. A separate bottle cap is included in the booster package. - The new 0.75L / 25 oz bottle fits into a bottle cage and is still large enough to be able to inflate even the most stubborn tires, from road up to 29 plus, really well