FIXE CLIMBING GEAR Mini Simple Pulley Красный

Very useful for mounting hoists and raising backpacks.

Not suitable for zip-lines.

Brand: FIXE EAN13: 8436020422836 Material: Aluminium Size/Large of item: 45X80mm Packaging unit: 1 Weight: 98g Net weight of item: 0.098 Gross weight of item: 0.108 Standard CEN: EN12278 Standard UIAA: 127 Rope pith diameter: ?Ø13mm Use: This equipment should only be used by trained and competent persons. Otherwise the user should be under the direct supervision of a trained and competent person. This notice will not teach you the techniques for climbing, alpinism and work at height or any other associated activity: you must have received qualifed instruction before using this product. Climbing, and any other activity for which these products may be used, is inherently dangerous. The consequences of incorrect selection, misuse or poor maintenance of equipment could result in damage, serious injury or death. The user must be medically capable to control their own security and any possible emergency situations. For equipment intended for use in fall arrest systems, it is essential for safety that the anchor device or anchor point is always positioned, and that the work is carried out in such way as to minimize both the potential for falls and the potential fall distance. The product should only be used as instructed and no alterations should be made to it. It may be used together with any appropriate items of suitable specifcation and according to the EN standards, with due consideration to the limitations of each individual piece of equipment. If possible this product should be used individually. The choice of rope and suitable load are marked on product. The pulley must be attached to a safe anchor. The rope must run in the groove of the pulley wheel. Humidity and cold temperatures may change the dynamic performance of this product but will have no infuence on its resistance. The use of gloves is recommended while using pulleys. Maintenance: Cleaning of the metallic parts: rinse in clean water and then dry. Temperature: Always keep this product below 50°C so that the performance of the product is not affected. Chemicals: withdraw the product from service if it comes into contact with chemical reagents, solvents or fuels which could affect the performance of the product. Storage: Store unpacked in a cool, dry, dark place.