DRV8256E - single-channel motor controller 48V/1,9A - Pololu 4038

Бестселлер
47399051
-13%
2 667 ₽
Старая цена 3 053 ₽

Мы сотрудничаем с поставщиками электрики Pololu и предлагаем вам самые выгодные предложения на брендовые товары из Америки. Опираясь на свой многолетний опыт, выбираем только лучшие позиции из аутлетов и дискаунтеров, чтобы предоставить вам оптимальные цены, в которые не включены дополнительные расходы на аренду торговых помещений.

Доставка товаров осуществляется прямо с нашего склада до указанного вами адреса. Вы получаете оригинальный товар по цене, которая недоступна для местных магазинов. В нашем интернет-магазине вы всегда найдете широкий ассортимент брендовых товаров с выгодными скидками.

Мы следим за каждым этапом вашей покупки и предоставляем отслеживание заказа на всех этапах, начиная с момента оплаты.

  • Бренд Pololu
  • Доставка из Польши
  • Пункт выдачи СДЭК 31 мая
  • Стоимость доставки заказа в Россию от 1 620 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение до
4.8
Напряжение от
48.0 V

Прочие свойства

Бренд
Pololu

Свойства

Каналы
1

Энергопитание

Сила тока
1.9 A

Описание

Product description: DRV8256E - single channel motor driver 48 V / 1,9 A - Pololu 4038

A small, single-channel DC motor driver. The DRV8256E module developed by Pololu is powered from 4.5 V to 48 V. Continuous current per channel is 1.9 A (momentary up to 6.4 A for 1 second). It allows simple control of speed and direction of motor rotation, using only two microcontroller pins. The controller is also equipped with protection against reverse polarity, too low voltage, too high current and too high temperature.

Single channel DC motor driver - DRV8256E.
Connection of DRV8256E motor driver.
Connection of DRV8256E motor controller

Supply motor voltage from 4.5 V to 48 V to the VIN pin. In a typical application, it is sufficient to connect two control lines: PHASE direction selection and PWM speed control to the ENABLE pin. Both lines are internally pulled up to ground through a resistor. SLEEP pin allows to switch the chip into low power mode. A low state must be specified to enter sleep mode.

DRV8256E truth table ENABLE PHASE OUT1 OUT2 MODE OF OPERATION PWM 1 PWM (H/OPEN) L Forward / deceleration at PWM speed %. PWM 0 L PWM (H/OPEN) Reverse / Disengage at PWM speed % PWM 0 X OPEN OPEN enable / IDLE (output off)
Outputs of the DRV8256E controller Pin Default state Description VIN Input voltage from 4.5 V to 48 V. GND System ground for the motor and logic. VM Pin giving access to the motor power supply after the MOSFET reverse voltage protection. It can be used to power other elements of the system with reverse polarity protection. OUT1 Motor 1 output. OUT2 Motor 2 output. EN LOW Activates the input for output activation / motor speed control. A high state causes the motor to run. Controlled by PWM. PH LOW Phase input to control the direction of rotation of the motor. FAULT FLOATING Open-drain, fault output activated by a low state. Pin goes low when current or voltage is exceeded. Must be pulled up with a resistor to default to the high state. SLEEP LOW The SLEEP input causes the controller to go into a low power state when the low state is applied. This pin can also be toggled to clear a locked overcurrent or overtemperature fault. VREF Current limiting threshold reference voltage.
DRV8256E motor controller specifications
  • Number of channels: 1
  • Supply voltage: 4.5 V to 48 V
  • Continuous current per channel: 1.9 A
  • Instantaneous current per channel: 6,4 A
  • Maximum PWM frequency: 100 Hz
  • Minimum logic voltage: 1.8 V
  • Maximum logic voltage: 5,5 V
  • Reverse polarity protection
  • Dimensions: 15.2 x 15.2 mm
  • Weight: 0,6 g
Schematics of the DRV8256E controller.
Useful links
  • Manufacturer's site: Pololu #4038
  • Diagram
  • Dimensions
  • 3D model

Доставка

Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода и начинается от 1 620 руб. Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 20 мая - 9 июня.

На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электрики Pololu в различные города России, такие как  Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.

Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.