CAN Bus Module - MCP2515 - SPI - hat for Feather - Adafruit 5709

Бестселлер
91724199
2 449 ₽

Мы сотрудничаем с поставщиками электроники Adafruit и предлагаем вам самые выгодные предложения на брендовые товары из Америки. Опираясь на свой многолетний опыт, выбираем только лучшие позиции из аутлетов и дискаунтеров, чтобы предоставить вам оптимальные цены, в которые не включены дополнительные расходы на аренду торговых помещений.

Доставка товаров осуществляется прямо с нашего склада до указанного вами адреса. Вы получаете оригинальный товар по цене, которая недоступна для местных магазинов. В нашем интернет-магазине вы всегда найдете широкий ассортимент брендовых товаров с выгодными скидками.

Мы следим за каждым этапом вашей покупки и предоставляем отслеживание заказа на всех этапах, начиная с момента оплаты.

  • Бренд Adafruit
  • Доставка из Польши
  • Пункт выдачи СДЭК 13 июня
  • Стоимость доставки заказа в Россию от 357 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение от
5.5 V
Напряжение до
2.7 V
Интерфейс UC - SPI
yes
Интерфейс UC - CAN
yes

Вес и размеры

Вес
0.005 кг

Прочие свойства

Бренд
Adafruit

Описание

Product description: CAN Bus module - MCP2515 - SPI - overlay for Feather - Adafruit 5709

Module manufactured by Adafruit, enabling communication via the CAN bus . It is compatible with Feather family tiles. The built-in MCP2515 integrated circuit allows communication via the SPI interface, while providing full support for the CAN bus. The board is also equipped with a TJA1051/3 transceiver that converts logic levels for 12 V / 24 V systems. The module is also equipped with a voltage converter that allows it to work with 3.3 V boards without the need for an additional power supply. It is possible to remove the termination of the CAN outputs (120 Ohm) by cutting the jumper located on the top side of the board. In the same way, you can change the connection of the CS and INT outputs (pins 5 and 6).

CAN Bus module - MCP2515 - SPI - overlay for Feather - Adafruit 5709.

CAN Bus module - MCP2515 from Adafruit.

MCP2515 and TJA1051/3 chips

The MCP2515 is a standalone version 2.0B CAN bus controller, the successor to the MCP2510 . Compared to its predecessor, improvements have been made, e.g. throughput and data filtering. It provides communication with speeds up to 1 Mb/s .

TJA1051/3 is a converter that ensures compatibility of the physical layer of the CAN bus. It has support for 3.3 V / 5 V logic and works with 12 V / 24 V systems that are found in CAN Bus devices. It has a high resistance to electromagnetic interference ( EMI ) and complies with the standards: ISO 11898-2: 2016, SAE J2284-1 to SAE J2284-5.

In our offer you will also find other communication modules - check it out!

Pin description
  • H/L: CAN bus transmission lines
  • GND: common system ground
  • TERM jumper: establishes CAN bus termination
  • RST jumper: connects the reset pin of the MCP2515 to the reset pin of the Feather module
  • Jumper CS: Connects the CS pin of the MCP2515 to pin 5 of the Feather module
  • Jumper INT: Connects the interrupt output of the MCP2515 to pin 6 of the Feather
  • CS: MCP2515 chip select chip
  • RST: resetting the MCP2515 chip
  • INT: MCP2515 interrupts
  • SLNT: Enables the TJA1051/3 to sleep

The module leads are solder pads.

Components included in the set.

CAN module technical specification
  • Built-in chip: MCP2515
  • Supply voltage: 2.7 V to 5.5 V
  • Communication interface: SPI
  • CAN bus speed: 1Mbps
  • Operating temperature: -40°C to 125°C
  • Two RX buffers
  • Module dimensions: 50.6 x 22.7 x 4 mm
  • Weight: 4.5g
Kit Contents
  • CAN Bus module - MCP2515 - SPI - overlay for Feather - Adafruit 5709
  • 1x3 pin screw connector
  • 2 x Goldpin strip 1x16 pin - 2.54 mm
Useful links
  • Manufacturer's website - Adafruit 5709
  • User Guide
  • MCP2515 documentation
  • Documentation of the TJA1051 chip
  • Layout diagram

Доставка

Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода и начинается от 357 руб. Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 2 июня - 22 июня.

На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электроники Adafruit в различные города России, такие как  Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.

Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.