BME680 multi-functional 4in1 environmental sensor - SPI / I2C - DFRobot SEN0375

Бестселлер
111100063
3 083 ₽

Мы сотрудничаем с поставщиками электроники DFRobot и предлагаем вам самые выгодные предложения на брендовые товары из Америки. Опираясь на свой многолетний опыт, выбираем только лучшие позиции из аутлетов и дискаунтеров, чтобы предоставить вам оптимальные цены, в которые не включены дополнительные расходы на аренду торговых помещений.

Доставка товаров осуществляется прямо с нашего склада до указанного вами адреса. Вы получаете оригинальный товар по цене, которая недоступна для местных магазинов. В нашем интернет-магазине вы всегда найдете широкий ассортимент брендовых товаров с выгодными скидками.

Мы следим за каждым этапом вашей покупки и предоставляем отслеживание заказа на всех этапах, начиная с момента оплаты.

  • Бренд DFRobot
  • Доставка из Польши
  • Пункт выдачи СДЭК 10 июня
  • Стоимость доставки заказа в Россию от 882 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Общие характеристики

Датчик - Температура от
-40 °C - 120 °C
Датчик - Температура до
85 °C
Точность измерения температуры датчика
+/- 1 °C

Порты и интерфейсы

Подключение
SPI / I2C

Прочие свойства

Бренд
DFRobot
Тип датчика
air quality, temperature, humidity, pressure

Описание

Product description: BME680 Multifunctional Environmental Sensor 4in1 - SPI / I2C - DFRobot SEN0375

MultifunctionalMEMS4in1environmental sensor manufactured by DFRobot. It has an embeddedBME680chip. The module is a combination of volatile organic compounds(VOC) sensor,temperaturesensor,humiditysensor andbarometer. It is used as a component forair qualitymonitoring, and is widely used in environmental monitoring, home automation and control, orGPS improvements. The use of MEMS technology and BME680 chip makes the sensor small in size andlow in power consumption. The measuring range for temperature is-40°C to 85°Cwith an accuracy of +/- 1°C; for humidity -0% to 100% RHwith an accuracy of +/- 3% RH; for atmospheric pressure -300 hPa to 1100 hPa with a measurement accuracy of +/- 0.6 hPa.

Product is compatible with Arduino. Producer prepared detaileduser guideandlibraryfor Arduino IDE environment.

BME680 4in1 multifunctional environmental sensor - SPI / I2C.

Example of sensor connection usingDFRduinoboard, Arduino equivalent. The board is not a part of kit, you can buy it separately in our shop.

Leads description and example connection diagram

The module hasleadsin the form of solderfields, to which you should solder includedgoldpin connectors. Connect thesensorto the microcontroller module according to the following description:

  • VCC- power supply pin within the range from 3.3 V to 5.5 V
  • GND- system ground
  • SCL- I2C interface clock line
  • SDA- I2C interface data line
  • 3V3- power supply pin 3,3 V
  • CS- Chip Select; selection pi: data / command
Technical specification of BME680 environmental sensor
  • Module: Volatile organic compound (VOC), temperature, humidity and barometer sensor
  • Embedded chip: BME680
  • Technology: MEMS
  • Input voltage range: 3.3 V to 5.5 V
  • Current consumption: 5 mA (25 mA for VOC measurement)
  • Communication interface: I2C bus / SPI
    • I2C bus: 3.3 V / 5 V support
    • SPI bus: 3.3 V support only
  • I2C interface address: 0x76
  • Temperature measurement range: from -40°C to 85°C
  • Accuracy of measurement: +/- 1°C (from 0°C to 65°C)
  • Humidity measurement range: 0% to 100% RH
  • Measuring accuracy: +/- 3% RH (ranges from 20% to 80% RH at 25°C)
  • Measuring range for atmospheric pressure: 300 hPa to 1100 hPa
  • Measuring accuracy: +/- 0.6 hPa (over the range from 300 hPa to 1100 hPa at temperature from 0°C to 65°C)
  • IAQ (indoor air quality) range: 0 to 500 ( the higher the score the worse the air quality)
  • Module dimensions: 18 x 15.6 mm
Sensor with integrated BME680 chip.

Kit contains dedicated goldpin connectors for self-soldering.

Kit contents
  • BME680 4in1 environmental sensor
  • Goldpin socket strip 1x4 - 2,54 mm pitch
  • Goldpin strip 1x6 - 2,54 mm pitch

In our assortment you will also find otherenvironmental sensors. We invite you to familiarize with the offer.

Useful links
  • Manufacturer's website: DFRobot SEN0375
  • User guide
  • Library for Arduino IDE

Доставка

Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода и начинается от 882 руб. Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 30 мая - 19 июня.

На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электроники DFRobot в различные города России, такие как  Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.

Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.