AQUALUNG Titan 2nd Stage Regulator

Breathe easythe third-generation Titan regulator brings updated design to this perennial favorite while keeping its excellent value. It´s a new look with the unchanged light weight, rugged durability, and easy-breathing functionality of its predecessors. And it still offers excellent performance and hassle-free maintenance. Features: ComfoBite: - Comfo-Bite mouthpiece is soft yet sturdy and reduces jaw fatigue with its unique palate bridge. Reusable Clip: - Perform quick and easy mouthpiece changes using the removable, reusable clip. Clipped Deflector: - Simple maintenance made possible by a reduced number of components and easy access to the exhaust valve through a clipped deflector. Deflector also splits up bubbles to decrease noise and protect the valve from expiration. Venturi Knob: - Easy control: the in-line ergonomic Venturi knob lets you make precise adjustments, even while wearing gloves. Polyurethane Purge Cover: - Rugged, durable polyurethane purge cover is abrasion-resistant, tear-resistant, minimizes inhalation effort, allows easy water purging, and helps protect against shock. Specifications: Mechanism: - Demand valve, downstream poppet Cracking Effort: - 2.5 to 4 mbar (36 to 58 mpsi) Venturi adjustment knob: - Yes Box bottom, deflector, Venturi vane: - ABS Purge Cover: - Polyurethane Mouthpiece, Exhaust Valve, Diaphragm: - Silicone Poppet: - Polyurethane Adjustable Crown: - Stainless steel Overall work of breathing (WOB) scores: - Avg. 1.0 joules/liter Care: - It is important to provide the proper preventative maintenance in order to ensure the best possible performance and maximum life of your Aqua Lung Regulator. The following maintenance procedures should be performed routinely after each use to ensure that the regulator is cleaned, inspected, and prepared for the next use or for storage. - As soon as possible after diving, the regulator should be rinsed thoroughly with fresh water while it is attached to a cylinder and pressurized with air. - Rinsing alone, however, will not sufficiently clean the regulator. To clean the regulator as thoroughly as possible Aqua Lung recommends: - Attach the regulator to a charged SCUBA cylinder, open the cylinder valve to pressurize the regulator, and thoroughly soak both the first and second-stages in a bath of fresh water.While the regulator is soaking, move the vane adjustment switch on the second stage (if present) back and forth several times from the “MIN” (or “—”) to the “MAX” (or “+”) settings. You may also turn the valve adjustment knob (adjustable models) slightly back and forth—no more than 1/4 turn. - After the regulator has been properly soaked, it is important to rinse it vigorously by flushing the mainspring cavity of the first stage regulator (non- environmentally sealed models only), the second-stage mouthpiece, and the openings in the second-stage front cover with a pressurized stream of water. This will remove the deposits of salt and minerals that were loosened during soaking.