Allo I2S Isolator V1.3 Clean Power - galvanic isolator SBC - DAC
- Артикул:
- 47897608
Характеристики
- Звуковая карта - доступ к GPIO
- yes
Общие характеристики
- Тип звуковой карты
- Isolator
Прочие свойства
- Бренд
- Allo Sparky
Описание
Galvanic isolator between minicomputer and DAC sound card in form of an overlay for Raspberry Pi, works withKatanaandBossDAC overlays.I2C, I2S and GPIOlines are isolated. The isolator supports sampling frequenciesfrom 44.1 kHz to 192 kHz. Additional I2C interface pins have been brought out on the board.
Allo I2S Isolator overlay compatibility v1.2The Isolator is compatible with the DAC, Katana andBossoverlays. Pleaserefer to the instructionsfor more information on connection.
I2S galvanic isolator v1.2.
Galvanic isolator between the minicomputer and the DAC sound card.
The isolator requires a 5V main power supply and a clean power supply as an auxiliary. The main power can be supplied in two ways, through the Raspberry or through the built-in USB C connector.
Main power supply
The J26 jumper is used to select the main power source.
- When this is in place, power is provided via the USB Type C connector. In this configuration, the Raspberry is also powered from the socket mentioned above.
- Removing the jumper allows the isolator to be powered from within the Raspberry Pi.
Additional (clean) power supply
- The power is drawn from the DAC cap placed on the galvanic isolator. In order to power the clean side it is necessary to change the jumper on it.
- Katana DAC: power supply to the galvanic part takes place when the J30 jumper is on.
- Boss DAC: power supply of the galvanic part is possible when jumper J25 is set.
Built-in PWR LED -by default active when additional power is connected, to disable it remove J29 jumper.
Additional I2C pins - there are additional pins on the board where I2C interface is located, so you can directly connect additional devices like display.
- Galvanic isolation between SBC and DAC
- Isolates I2C, I2S and GPIO
- Sampling frequency: from 44.1 kHz to 192 kHz
- Isolator is compatible with DAC, Katana and Boss frontends
- Dimensions: 64 x 56 x 22 mm
- Weight: 23 g
The isolator is compatible with Allo DAC Katana and Boss.
- Manufacturer website Allo I2S Isolator V1.2
- User manual
- Raspberry configuration with Allo sound cards
Доставка
Мы доставляем товары напрямую из Германии в Россию курьерской службой или в почтовое отделение. Вы можете выбрать подходящий для вас способ доставки при оформлении заказа. Стоимость доставки зависит от выбранного метода и начинается от 875 руб. Время доставки зависит от выбранного города и метода доставки, но в среднем занимает от 10 до 30 дней. Если вы оформите заказ прямо сейчас, мы доставим его в период с 2 июня - 22 июня.
На протяжении уже более 10 лет мы работаем с надежными и проверенными нами службами и предлагаем доставку электроники Allo Sparky в различные города России, такие как Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие.
Вы всегда можете отследить свой заказ, используя номер посылки, сразу как только он будет отправлен к вам с нашего склада.
Мы сотрудничаем с поставщиками электроники Allo Sparky и предлагаем вам самые выгодные предложения на брендовые товары из Америки. Опираясь на свой многолетний опыт, выбираем только лучшие позиции из аутлетов и дискаунтеров, чтобы предоставить вам оптимальные цены, в которые не включены дополнительные расходы на аренду торговых помещений.
Доставка товаров осуществляется прямо с нашего склада до указанного вами адреса. Вы получаете оригинальный товар по цене, которая недоступна для местных магазинов. В нашем интернет-магазине вы всегда найдете широкий ассортимент брендовых товаров с выгодными скидками.
Мы следим за каждым этапом вашей покупки и предоставляем отслеживание заказа на всех этапах, начиная с момента оплаты.