INOOK AXM Snowshoes EU 34-47

A simplified version of the RXM with single buckle adjustment. Automatic heel step – Climbing assistant: - One push with the pole on the rear part of the AGS -without any bending- and the binding plate is freed (Photo 1). Another push and the plate is locked or in climbing position, depending if the foot was lifted or not. (Photo 2) You will find this Inook patent on all our models, except on the Discovery Range, Futura & Junior models. Front tightening 45°: - This detail is very important because it enables the shoe to be held perfectly, without creating any pressure line, which could cause real trouble at the end of the day. - The foot’s shape is respected. Wing Concept & Multi Spike Concept: - Wing Concept: The frame seen from below shows the vaulted profile, which provides stability and excellent hold whilst traversing slopes. The snow on the frame falls to the sides, but especially beneath the frame the snow can not stick; even with plus degrees the pace stays light. This advantage is already 20 years old, born with the first model SNS25.5.41 and has been assigned on nearly all other models. Multi Spike Concept: - The frame seen from below shows the vaulted profi le, which provides stability and excellent hold whilst traversing slopes. Shock absorber: - To make the most of a snowshoe tour, to hear just nature, all binding plates are equipped with shock-absorbers under the heel. - Colours depend on the models. Easy handing & small attentions: - Changing size is really simple; you press the lever against the rear part of the binding and pull it backwards to extend the size. Then you just push the complete part until it touches the shoe; it locks automatically. To maintain the snowshoe tight to the ankle, Inook offers three binding systems: - A Velcro strap - An injected buckle binding, with single or double regulation - A soft pad strap with double buckle regulation. Specifications: 1040 g x 2 45 > 120 kg